Nitrogen Generator Machine for Laser Cutting Bright Cutting High Purity Nitrogen Cutting Equipment
Categories: laser Machine Equipment, Nitrogen Cutting
Product Description
Bright Cutting(high-purity nitrogen cutting) equipment
The Bright Cutting equipment can compress ar through a compressor, remove impurities through a filter, remove water through a cold dryer (suction dryer), perform pressure swing adsorption, and boost the pressure of a booster to generate high-purity (99.99%), specific pressure nitrogen gas to meet the reguirements of high-guality non-oxidation laser cutting.
The equipment includes:
air compressor, air storage tank, filter, cold dryer (suction dryer), nitrogen generator, relevant control system, and instruments.
|
TECHNICAL PARAMETERS
|
BCP40
|
BCP60
|
BCP80
|
BCP150
|
|
Installed power (KW)
|
44
|
66
|
66
|
127
|
|
Volume of flow(Nm2/h)
|
40
|
60
|
80
|
150
|
|
Pressure(Bar)
|
25
|
25
|
25
|
25
|
|
Dew point(°℃)
|
-20/-40
|
-20/-40
|
-20/-40
|
-20/-40
|
|
Compressed air quality
|
ISO8573-1-1-4-1
|
ISO8573-1-1-4-1
|
ISO8573-1-1-4-1
|
ISO8573-1-1-4-1
|
|
Ultra clean gas quality
|
ISO8573-1-1-2-1
|
ISO8573-1-1-2-1
|
ISO8573-1-1-2-1
|
ISO8573-1-1-2-1
|
|
Dimension
|
9*1.3*2.3M
|
9*1.6*2.5M
|
9*1.6*2.5M
|
9*1.6*2.5M
|
|
Adaptive power range
|
≤3kw
|
≤6kw
|
≤12kw
|
≤20kw
|
|
Max. cutting thickness
(stainless steel)
|
2mm
|
4mm
|
8mm
|
16mm
|
Technological Process Diagram
A new technology that can replace air, oxygen and liquid nitrogen.
Fine Cutting technology is a combination ofequipment that compresses the air through the air compressor, removes impuritiesthrough the filter, removes water by the cold dryer (suction dryer), and produces nitrogen by pressure swing adsorption nitrogen generator. The equipment mainly includes air compressor, gas tank, filter, cold dryer (suction dryer), nitrogen generator, relevant control systems and instruments.
Comparison of cutting cost and advantages
Taking cutting a plate with the same thickness of 10MM as an example
Area of application
Stainless steel bright cutting, high-quality cutting of carbon steel , galvanized sheet, and aluminum. Application scenarios High quality cutting scenario for stainless steel below 8MM, perfect replacement for liquid nitrogen Featuring both Fine Cutting application scenarios, achieving high-quality cutting of carbon steel and aluminum alloys (with adjustable purity and customization required)
|
NO.
|
Name of part
|
QTY.
|
Manufacturer
|
|
1
|
Efficient screw air compression unit
|
1
|
DEHAHA
|
|
2
|
Full performance freeze-drying unit
|
1
|
CHAODUN/Others
|
|
3
|
High efficiency filter
|
1
|
ATS
|
|
4
|
Precision filter
|
1
|
ATS
|
|
5
|
Activated carbon filter
|
1
|
ATS
|
|
6
|
low pressure gas tank
|
2
|
ZHENGBO/Others
|
|
7
|
High purity nitrogen generator
|
1
|
LASEREIN
|
|
8
|
High pressure gas tank
|
1
|
ZHENGBO/Others
|
|
9
|
High pressure refrigeration dryer
|
1
|
CHAODUN
|
|
10
|
Intelligent control system (set)
|
1
|
LASEREIN
|
|
11
|
Supercharger
|
1
|
ZENGPENG
|
Related products
-
laser Machine EquipmentWater Cooled Fiber Laser Welding Machine 1.5KW 2KW 3KW For Metal
-
-
-
laser Machine Equipment1500w Fiber Laser Welding Machine