Chaodun Heated Adsorption Dryer

WORKING PRINCIPLE

Micro thermal regeneration adsorption dryer is a kind of energy saving and efficient dryer, is to absorb the advantages of thermal regeneration and no heat generation and research and development of the product, the reclaimed gas in micro heating and temperature rise for the adsorption tower bed layer of the purge regeneration, can save the regeneration of gas consumption, regeneration effect is good, adsorption work longer time.

CORE STRENGTHS
THE USE OF HIGH-QUALITY ACCESSORIES

l.the use of high-performance pneumatic valve, reliable performance, sensitive action, can avoid poor valve performance leakage or valve stuck and other faults;

2.Using Germany (NASS) coil reversing solenoid valve, switching fast and reliable, long life.

3, the use of arge torque aluminum alloy pneumatic actuator, torque, smooth action, internal self-lubrication without adding lubricant;

4. High performance adsorbent with large specific surface area, strong adsorption capacity, strong wear resistance and high grinding resistance; Ensure the dew point is stable and not powdery after long-term use;

5. adopt PLC plus LCD controller, Chinese interface, easy to understand, easy to operate and maintain;6.The stainless steel heater is integrated with the PID temperature control mode, presenting the advantages of fast heating and high control accuracy;

IMPROVED PERFORMANCE

l.low operating noise, the use of silent one-way valve and high-performance silencer, to ensure that the running process and exhaust process noise to the lowest value;

2.low pressure automatic protection function, when the working pressure is lower than the normal valve control pressure automatically stop protection, pressure rises after the automatic restart； avoid the operation of the wrong action caused by abnormal system pressure;

3.Automatic charging function, automatic charging before the valve switch, so that the pressure of the cylinder can be switched after the pressure, to ensure the stability of the pressure of the cylinder, to avoid the impact of the pressure fluctuation of the pipeline on adsorption, to ensure the service life of the adsorbent; Treated gas volume: 0.8nm3 /min~600Nm3/min

Technical Data Sheet