Precitec Laser Cutting Head Repair, Laser Sensor Failure Repair
Raysoar can repair all models of Precitec cutting heads, including Procutter 1.0, Procutter 2.0, Lighcutter 1.0, Lighcutter 2.0, and more. The following is a list of common Precitec cutting head failures. 1. Optical component failure repair The Precitec cutting head is an important part of the laser cutting system and its optics (e.g., lenses) are critical to the quality of the cut. When the optics are damaged or worn out, the cut quality will be affected. The collimator focusing lens is damaged and burned out, Raysoar offers a repair service to replace the collimator focusing lens or lens set replacement. Replacement of upper and lower protective lens and seals. 2. Focusing motor failure Damaged steel belt replacement, damaged collimator lens set replacement. 3. Circuit board failure Cutting head circuit repair. 4. Indicator light alarm The cutting head alarms when there is a malfunction. When the indicator light is on it reflects different damage information, all led lights are off, a red light is on, a red light blinks 3 times per second, a red light blinks once per second, and so on. It can indicate many different types of malfunctions including power supply conditions, damaged optics, air pressure issues, upper and lower protective mirror issues, and more. By using the temperatures of the cutting head, collimator set, focusing lens set, and lower protective mirror shown on the ProCutter APP temperature mirror, identify the area of the high-temperature warning and use your hand to touch the corresponding area on the outside of the cutting head while the cutting head is stopped, to determine if the temperature value shown by the APP is true. If the hand temperature is normal, but the APP temperature display is obviously too high or unstable, and the second LED or the fourth LED lights up red, please send the cutting head to Raysoar Technology for inspection and repair. Cutting Head Sensor Fault Repair. Sensor Repair Service Items: 1. Sensor Thimble Repair 2. Nozzle Connector Pin/Pin Seat Repair 3. BNC Sensor Pin Seat Repair 4. Sensor Circuit Repair 5. Sensor Circuit Replacement 6. Broken Sensor Body Repair 7. Amada Sensor Body Break Repair 8. Amada Sensor Insulated Seat Replacement 9. Sensor Threaded Nut Repair 10. Sensor Lower Head Repair 11. Sensor Airtightness Repair Sensor repair process: 1.customer fault description; 2.Send your sensor to us; 3.Check the sensor and provide a quote. 4.Confirm the quotation and payment. 5.Repair the sensor and provide the repair service report. 6.Send the sensor back to the customer. 7.Online technical support for after-sales service. 8.Repair the sensor free of charge, and we will bear the cost for the same fault after repair, except for the fault caused by improper operation or collision. Share: Facebook Twitter Pinterest LinkedIn Contact us